Moderators PTR200S Posted December 19, 2019 Moderators Report Share Posted December 19, 2019 A job on today, apart from cleaning the beast, was to try and fit the pocket that fits to the right side of the steering wheel about knee height. When I got the van the original was broken but the importer supplied a brand new one , genuine Honda,.......I tried fitting it at the time but couldn't get it to snap into place. I have done other ones on Accord Tourers / Civic and had no problem. This one I just cannot get it in place to make it operate properly. Now I can't recall which way round the spring fits and 18 months plus on it still sits on the workbench.😜 Anyone any thoughts on which way the spring fits...better still just nip round and fit it for me before I lose the will to live 😄 2 Link to comment Share on other sites More sharing options...
Moderators Laird_Scooby Posted December 19, 2019 Moderators Report Share Posted December 19, 2019 57 minutes ago, PTR200S said: At a rough guess, id say turn the spring round on that hook on the back of the tray so the coils of the spring are flush with the back of it and then find the holes in the dash where the two "hooks" slot in. I suspect it has a sort of over-centre movement so it stays fully out or fully in with a delicate "balance point" somewhere in the middle. 2 Link to comment Share on other sites More sharing options...
Moderators PTR200S Posted December 26, 2019 Author Moderators Report Share Posted December 26, 2019 On 12/19/2019 at 4:12 PM, Laird_Scooby said: At a rough guess, id say turn the spring round on that hook on the back of the tray so the coils of the spring are flush with the back of it and then find the holes in the dash where the two "hooks" slot in. I suspect it has a sort of over-centre movement so it stays fully out or fully in with a delicate "balance point" somewhere in the middle. oops, buggered it now, broken the bracket off the pocket..... screwed the spring off, put some velcro on to hold it shut 🤣 2 Link to comment Share on other sites More sharing options...
Administrators hughezee Posted December 26, 2019 Administrators Report Share Posted December 26, 2019 oops more beer needed next time Pete 🤣 2 Link to comment Share on other sites More sharing options...
Darren Posted March 5, 2021 Report Share Posted March 5, 2021 I've just bought an Elysion and this bit is missing. Do you know when I can source one from please? 3 Link to comment Share on other sites More sharing options...
Moderators PTR200S Posted March 6, 2021 Author Moderators Report Share Posted March 6, 2021 18 hours ago, Darren said: I've just bought an Elysion and this bit is missing. Do you know when I can source one from please? welcome to H6nda ! Which Elysion have you got?? Post a bit about it in the Newbie section if you can 😁 Which bit is missing ? The complete pocket ? Or the spring ? 2 Link to comment Share on other sites More sharing options...
Administrators hughezee Posted March 6, 2021 Administrators Report Share Posted March 6, 2021 Welcome to the club Darren, FYI new member introductions go a long way and maybe share some pictures too? 🖐️ I have linked the relevant sections: https://honda6.ipbhost.com/forum/7-newbies-say-hi/ and for pic's: https://honda6.ipbhost.com/forum/456-pics-projects/ 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now