markap385

On 12/14/2023 at 8:33 PM, hughezee said:

I have some spare, drop me a DM with your details and I will sort those wires as well...👍

I've sent you a dm

On 12/12/2023 at 8:20 PM, PaulS said:

Can't help with headlights but I wonder if they were the only damage from hitting the deer?  Usually a wing , front bumper & bonnet suffer in such impacts...

The bonnet and front bumper were damaged also, but I've straightened the bonnet out, and I've got a spare bumper to go on 

Hi all, after replacing my after market headlights for some standard ones, really loved going back to factory spec...

I went and hit a deer 😐😐 so now I need two replacements 😂😂 can anyone help? TIA

1 hour ago, Harry93 said:

They look much better. Certain aftermarket ones make the car look ricey, but can't go wrong going back to standard. Just give them lenses a good clean and upgrade the bulbs to LEDs if you want 👍

https://postimg.cc/ZWksyN3P

These were the lenses when I got them, I've polished them up fairly decently at the moment,  but I'll have another good go at them when it's not so chilly haha 

So new / old standard lights are on. 

So much better imo 

https://postimg.cc/gallery/4c0nsyZ

Thoughts? 

https://postimg.cc/gallery/R9XXfG6

So the new/old standard headlights are on, 

So much better imo 

On 11/16/2023 at 9:22 PM, hughezee said:

Hi there and welcome to the club 😉 whereabouts are you located 🤔 I might be able to help with the parts you need. 👍

Me again.. 

I'm looking for a full carpet if you happen to have one? 

3 hours ago, hughezee said:

Sure I will sort out the wires needed and yes HB3, HB4 are the main bulbs. 👍

Brilliant thank you 

12 minutes ago, Laird_Scooby said:

Sadly they won't fit my CR-V or i probably would.............

Cable ties and duct tape will make anything fit 😛😛

1 hour ago, Laird_Scooby said:

There is always one dissenter - i like those lights!

Honda made the 2nd gen CR-V with square (ish) headlamps and on the facelift fitted lights with two round reflectors in the same housing as the pre-facelift. I keep thinking about "updating" my lights which would be a very similar look to what you have there.

Of course if you want the original look then the original lights are what you need to go for and it's what you want/like as it's your car.

Well these ones are up for sale if you're interested. £50ono takes them 🤔🤔

42 minutes ago, Harry93 said:

Congratulations on getting the coupe. I remember seeing yours on Facebook marketplace. You are right about the parts being rare, majority of the sourcing can be found from the USA as there is alot of support and aftermarket choices for these cars over there. 

If you are thinking about getting the headlights back to stock, I would suggest looking on eBay for a good used Stanley brand set, there are quite a few being sold in the UK. Another option is to go aftermarket and try Amazon or Andy Auto Sport, but again these are from the USA. 

I've found a set of uk standard headlights on ebay, I've ordered them, the only set I could find across the entire Internet sales sites.

Just need to polish up the lenses and they will be good to go.

Only thing I need to do is re wire the loom as the previous owner chopped them about to fit these after market ones 

On 11/16/2023 at 9:22 PM, hughezee said:

Hi there and welcome to the club 😉 whereabouts are you located 🤔 I might be able to help with the parts you need. 👍

If you can help, I'd need the headlight bulb wiring as the previous owner chopped the wires about to fit the aftermarket headlights, and when I put the standard housings back in am I right in thinking the bulbs are hb3 and 4?

So this is her. With the horrible aftermarket lights  

On 11/24/2023 at 3:10 AM, PTR200S said:

Welcome to H6nda !!

Don't forget we need pictures , 🤣🤣🤣🤣🤣🤣  of your progress....., is it on the road ?  Are you just wanting to improve it ? 

https://i.postimg.cc/28Bk3w42/Screenshot-20231028-225654-Gallery.jpgthink I've managed it haha 

25 minutes ago, PTR200S said:

Great stuff !!

Get those pics up and tell us how you got on with the changes  🤞

I've tried to upload some but it says the files are too big? I'm so confused this is my first time on a forum hahs

On 11/16/2023 at 9:22 PM, hughezee said:

Hi there and welcome to the club 😉 whereabouts are you located 🤔 I might be able to help with the parts you need. 👍

I'm located in gloucester 

On 11/24/2023 at 3:10 AM, PTR200S said:

Welcome to H6nda !!

Don't forget we need pictures , 🤣🤣🤣🤣🤣🤣  of your progress....., is it on the road ?  Are you just wanting to improve it ? 

It's on the road. Clean and tidy underneath runs really well, found a bonnet and headlights now, taking it back to standard,

Hi all, I've just purchased an 2000 accord coupe auto 2.0vtec 

I can't find parts for there's anywhere. I love this car as I've owned one previously many years ago..

Need a bonnet ( any colour) 

And headlights. 

Please help 🤔🤔